bottom valve Current：Home > Product List > bottom valve
Q-type pneumatic bottom valve
| Technical Parameters | |
| ◆specification：1"～5" DN40-DN100 | ◆Compressed air connection: air pipe connector G1/8" |
| ◆Connection method: welding, clamp, thread, flange | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Maximum working pressure：≤10bar | ◆Contact with material：SS304/SS316L |
| ◆Supply compressed air：4-8bar | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
Q-type Manual Tank Bottom Valve
| Technical Parameters | |
| ◆specification：1.5"～4" DN40～DN100 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread, flange | ◆Contact with material：SS304/SS316L |
| ◆Maximum working pressure：≤10bar | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
W-type Pneumatic...
| Technical Parameters | |
| ◆specification：1.5"～4" DN40～DN100 | ◆Proximity switch: 6-36V DC 2 NPN or PNP (optional) |
| ◆Connection method: welding, clamp, thread, flange | ◆Input power: 24V DC |
| ◆Maximum working pressure：≤10bar | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Supply compressed air：4-8bar | ◆Contact with material：SS304/SS316L |
| ◆Compressed air connection: air pipe joint G1/8" | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
Pneumatic aseptic...
| Technical Parameters | |
| ◆specification：1"～2" DN25～DN50 | ◆Compressed air connection: air pipe joint G1/8" |
| ◆Connection method: welding, clamp | ◆Working temperature: -10 ° C to 140 ° C |
| ◆Maximum working pressure：≤6bar | ◆Contact with material：SS304/SS316L |
| ◆Supply compressed air：4-8bar | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seal: Polytetrafluoroethylene (PTFE) | |
Manual aseptic tank bottom valve
| Technical Parameters | |
| ◆specification：1"～2" DN25～DN50 | ◆Working temperature: -10 ° C to 140 ° C |
| ◆Connection method: welding, clamp | ◆Contact with material: SS304/SS316L |
| ◆Maximum working pressure: ≤6bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: Polytetrafluoroethylene (PTFE) | |
Home
|
About US|
News List|
Product List COPYRIGHT © 2018 Wenzhou Sugong Fluid Equipment Technology Co., Ltd.