application

  This design is designed to ensure the mixing and leak detection of products when two different products flow through the same valve. It is widely used in food, brewing, beverage, dairy and other industries.

Technical Parameters

◆Specifications: 1.5"～4" DN40～DN100

◆Connection method: welding, clamp, thread, flange

◆Maximum working pressure: ≤6bar

◆ Supply compressed air: 4-8bar

◆Compressed air connection: air pipe joint G1/8"

◆Proximity switch: 6-36V DC 3 NPN or PNP (optional)

◆ Solenoid valve: 24V DC 3 solenoid valves

◆Proximity switch: 6-36V DC 2 NPN or PNP (optional)

◆Working temperature: -10 ° C to 120 ° C

◆Contact with material: SS304/SS316L

◆Internal surface contact product: Ra≤0.8μm

◆Sealing: EPDM, Silicone Rubber (SI), Fluororubber (FPM)

working principle

This type of valve has two independent spool seals. During normal operation, a leak chamber is formed between the two seals. In the event of an accident or product leak that may occur occasionally, the product will flow into the leak cavity and be discharged from the discharge port without causing contamination or mixing of the product; when the valve is open, the leak cavity It is closed, and there is no product spillage during normal valve operation. Therefore, the delivered product can flow from one pipeline to the other. This type of valve can be CIP cleaned.