Product List Current：Home > Product List
Regulating breathing valve
| Technical Parameters | |
| ◆specification：1.5"～2.5" DN40～DN50 | ◆Maximum vacuum：≤-0.9bar |
| ◆Connection method: clamp, thread | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Maximum positive pressure value: ≤3.2bar (pressure adjustable) | ◆Contact with material：SS304/SS316L |
| ◆Inner surface contact product：Ra≤0.6μm | |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
Hygienic Sampling Valve
| Technical Parameters | |
| ◆specification：1/4"～1/2" DN8～DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Contact with material：SS304/SS316L |
| ◆Maximum working pressure：≤10bar | ◆Inner surface contact product：Ra≤0.6μm |
| ◆Seals：SI、EPDM、FPM | |
Elbow valve
| Technical Parameters | |
| ◆specification：1"～1.5" DN25～DN40 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Contact with material: SS304/SS316L |
| ◆Maximum positive pressure value: ≤6bar | ◆Inner surface contact product: Ra≤0.6μm |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
Pneumatic butterf...
| Technical Parameters | |
| ◆specification：3/4"～6" DN20～DN150 | ◆Compressed air connection: air pipe connector G1/8" |
| ◆Connection method: welding, clamp, thread, flange | ◆Proximity switch: 6-36V DC 2 NPN or PNP (optional) |
| ◆Maximum working pressure: ≤10bar | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Supply compressed air: 4-8bar | ◆Contact with material: SS304/SS316L |
| ◆Inner surface contact product: Ra≤1.6μm | |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
pneumatic butterfly valve
| Technical Parameters | |
| ◆specification：3/4"～6" DN20～DN150 | ◆Compressed air connection: air pipe connector G1/8" |
| ◆Connection method: welding, clamp, thread, flange | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Maximum working pressure: ≤10bar | ◆Contact with material: SS304/SS316L |
| ◆Supply compressed air: 4-8bar | ◆Inner surface contact product: Ra≤1.6μm |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
Intelligent Pneum...
| Technical Parameters | |
| ◆specification：3/4"～6" DN20～DN150 | ◆Proximity switch: 6-36V DC 2 NPN or PNP (optional) |
| ◆Connection method: welding, clamp, thread, flange | ◆Input power：24V DC |
| ◆Maximum working pressure：≤10bar | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Supply compressed air: 4-8bar | ◆Contact with material：SS304/SS316L |
| ◆Compressed air connection: air pipe joint G1/8" | ◆Inner surface contact product：Ra≤1.6μm |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
Pneumatic aseptic...
| Technical Parameters | |
| ◆specification：0.5"～4" DN10～DN100 | ◆Compressed air connection: air pipe connector G1/8" |
| ◆Connection method: welding, clamp, flange | ◆Continuous working temperature: -20 ° C to 120 ° C (EPDM / PTFE) |
| ◆Maximum working pressure: ≤10bar | ◆Contact with material: SS304/SS316L |
| ◆Supply compressed air: 4-8bar | ◆Inner surface contact product: Ra≤0.4μm |
| ◆Seals：EPDM/PTFE、EPDM、SI、FPM | |
Manual aseptic diaphragm valve
| Technical Parameters | |
| ◆specification：0.5"～4" DN10～DN100 | ◆Continuous working temperature: -20 ° C to 120 ° C (EPDM / PTFE) |
| ◆Connection method: welding, clamp, flange | ◆Contact with material: SS304/SS316L |
| ◆Maximum working pressure: ≤10bar | ◆Inner surface contact product: Ra≤0.4μm |
| ◆Seals：EPDM/PTFE、EPDM、SI、FPM | |
Q-type pneumatic bottom valve
| Technical Parameters | |
| ◆specification：1"～5" DN40-DN100 | ◆Compressed air connection: air pipe connector G1/8" |
| ◆Connection method: welding, clamp, thread, flange | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Maximum working pressure：≤10bar | ◆Contact with material：SS304/SS316L |
| ◆Supply compressed air：4-8bar | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
Home
|
About US|
News List|
Product List COPYRIGHT © 2018 Wenzhou Sugong Fluid Equipment Technology Co., Ltd.